❞ كتاب Heat And Sound Insulation Materials ❝

MASTERPLAST GROUP INTERNATIONAL 3
HEAT AND SOUND INSULATION MATERIALS
2MASTERPLAST GROUP INTERNATIONAL
HEAT AND SOUND INSULATION MATERIALS
ISOMASTER® EPS thermal- and sound insulation materials are made of expanded polystyrene, which are
durable and has good thermal resistance, thanks to its special cell structure. The designation in the name
of the product refers to the compressive strength of the material. Easy to work and form the material, that
is applicable between (–)65°C – (+)85°C, but the installation of it is not recommended, where the temperature
long-time exceeds (+)70°C. In places exposed to humidity, the application of these products is not
offered, because the moisture degrades their thermal resistance. They contain flame-retardant additives
and belong to Euroclass “E” (according to EN 13501-1), they are not dripping during combustion and are
self-extinguishing after elimination of direct flame effect. The product is not environment depleting, but its
mechanical protection after installation is necessary. ISOMASTER® EPS boards are available in boards
(50 × 100 cm).
EPS 30
EPS
Fields of application: Non-loadable thermal insulation board, as non-passable insulation of loft
spaces, among wooden battens under OSB sheet boarding, in expansions gaps of buildings.
Marking: blue line
Compression strength (10%): 30 kPa
Declared thermal conductivity (λD): 0.04 W/mK
Water vapour resistance factor (μ): 20-40
Designation: EPS EN 13163-T1-L1-W1-S1-P4-DS(70)3-BS50-CS(10)30-DS(N)5
Width Available Code
2 cm 0,24 m3/bale, 24 pcs/bale 0501-03002000
3 cm 0,24 m3/bale, 16 pcs/bale 0501-03003000
4 cm 0,24 m3/bale, 12 pcs/bale 0501-03004000
5 cm 0,25 m3/bale, 10 pcs/bale 0501-03005000
6 cm 0,24 m3/bale, 8 pcs/bale 0501-03006000
7 cm 0,245 m3/bale, 7 pcs/bale 0501-03007000
8 cm 0,24 m3/bale, 6 pcs/bale 0501-03008000
10 cm 0,25 m3/bale, 5 pcs/bale 0501-03010000
12 cm 0,24 m3/bale, 4 pcs/bale 0501-03012000
EPS 70
EPS H-80
Fields of application: thermal insulation under moderate load. In ventilated cold roof
structures, with ventilated air gap behind assembled façade covering; with or without
a ventilated air gap in double-layer masonry; on the lower plane of a slab with or without
covering, among wooden battens under OSB sheet boarding.
Marking: 2 × blue line
Compression strength (10%): 70 kPa
Declared thermal conductivity (λD): 0.038 W/mK
Water vapour resistance factor (μ): 30-40
Designation: EPS EN 13163-T1-L1-W1-S1-P4-DS(70.-)3-BS115-CS(10)70-DS(N)5
With Available Code
2 cm 0,24 m3/bale, 24 pcs/bale 0501-07002000
3 cm 0,24 m3/bale, 16 pcs/bale 0501-07003000
4 cm 0,24 m3/bale, 12 pcs/bale 0501-07004000
5 cm 0,25 m3/bale, 10 pcs/bale 0501-07005000
6 cm 0,24 m3/bale, 8 pcs/bale 0501-07006000
7 cm 0,245 m3/bale, 7 pcs/bale 0501-07007000
8 cm 0,24 m3/bale, 6 pcs/bale 0501-07008000
10 cm 0,25 m3/bale, 5 pcs/bale 0501-07010000
12 cm 0,24 m3/bale, 4 pcs/bale 0501-07012000
Fields of application: Thermal insulation of external thermal insulation systems,
covered with proper finishing coat (e.g. acrylic or silicone rendering).
Marking: red line
Compression strength (10%): 80 kPa
Declared thermal conductivity (λD): 0.038 W / mK
Water vapour resistance factor (μ): 25-40
Designation: EPS EN 13163-T2-L2-W2-S2-P4-BS125-CS(10)80-DS(N)2-DS(70)1-TR150
With Available Code
2 cm 0,24 m3/bale, 24 pcs/bale 0501-08002000
3 cm 0,24 m3/bale, 16 pcs/bale 0501-08003000
4 cm 0,24 m3/bale, 12 pcs/bale 0501-08004000
5 cm 0,25 m3/bale, 10 pcs/bale 0501-08005000
6 cm 0,24 m3/bale, 8 pcs/bale 0501-08006000
7 cm 0,245 m3/bale, 7 pcs/bale 0501-08007000
8 cm 0,24 m3/bale, 6 pcs/bale 0501-08008000
10 cm 0,25 m3/bale, 5 pcs/bale 0501-08010000
12 cm 0,24 m3/bale, 4 pcs/bale 0501-08012000
Other thicknesses on request






-
من الهندسة المدنية - مكتبة كتب الهندسة والتكنولوجيا.